Thursday, July 26, 2012

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #0000-160, 1/4" Length (Pack of 10)

!9#Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #0000-160, 1/4" Length (Pack of 10)

Brand : Antrin Miniature Specialties, Inc.
Post Date : Jul 26, 2012 14:30:05
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch).

Fillister head for high torque and good hold-down strength

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strength

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Remedy Valvoline Vv155 Maxlife Sae 5w-30 High Mileage Motor Oil - 1 Quart (case O...

Friday, July 20, 2012

1/4'' x 9/16'' Machine Eye Bolt Stainless Steel Type 316

!9#1/4'' x 9/16'' Machine Eye Bolt Stainless Steel Type 316

Brand : US Cargo Control
Rate :

Post Date : Jul 20, 2012 04:30:04
N/A

Machine eye bolts are often referred to as lifting eye bolts since they are commonly used as a connection point in lifting systems. Shoulder machinery eyebolts should always be used for angled lifts, because the shoulder gives it greater strength. Attaching slings or hooks directly to an eye bolt will increase the stress on the bolt, so shackles should be used for connection instead. "A" = 1/4" "B" = 1" "C" = 5/8" "D" = 1/2" "E" = 9/16" Working Load Limit = 400 lbs Part # MSSEB1/4X9/16

06702 Snap Fokker Dr1 Mini Kit... Best Quality

Friday, July 13, 2012

Stainless Steel Machine Screw, Button Head, Tamper Resistant Pin-in-Star Drive, #4-40, 1/2" Length (Pack of 100)

!9# Stainless Steel Machine Screw, Button Head, Tamper Resistant Pin-in-Star Drive, #4-40, 1/2" Length (Pack of 100)

Brand : Small Parts | Rate :

| Post Date : Jul 14, 2012 01:30:05 | Usually ships in 24 hours

Stainless Steel Machine Screw, Button Head, Tamper Resistant Pin-in-Star Drive, #4-40, 1/2" Length (Pack of 100)

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Button head style fasteners combine the driving ease of a socket cap screw (using hex socket for driving) with the smooth, rounded appearance of a round-head screw. Loosening tamper-resistant fasteners requires rare tools that the average user is not likely to have on hand, often preventing vandalism, theft, or product modifications by untrained users. Although not impossible to obtain, drivers for tamper resistant screws are rare and usually more difficult to find.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

More Specification..!!

Cheaper Wakeboarding Street Sign - Sport Sign - High Quality Aluminum Street Sign... Instruction Dayton Audio Caxm-1.5n Xlr-m To 1/4 Trs Cable 1.5 Ft....

Monday, July 9, 2012

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

!9# Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

Brand : Small Parts | Rate :

| Post Date : Jul 09, 2012 07:36:05 | Usually ships in 24 hours

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Fillister head for high torque and good hold-down strength
Driven by a flat-bladed driver
Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads